KAITSU® G-218

KAITSU® G-218 represents a new modified generation of polycarboxylated hyperplasticisers specifically
developed to achieve high performance concrete properties with long slump retention. KAITSU® G-218
conforms to ASTM C494 Type G.
One liter weigh approximately 1.045 kg ± 0.02kg.
Use
KAITSU® G-218 can be used in a variety of construction projects, including commercial, industrial,
and residential building, bridges, highways, roads and tunnels. KAITSU® G-218 also make it an ideal
choice for hot weather conditions, where traditional concrete mixtures may set too quickly.
Advantages
KAITSU® G-218 can provide the following properties:
– Lower permeability
– Increased early & ultimate strengths
– Increased flexural strengths.
– Better carbonation resistance.
– Reduced shrinkage & creep
– May produce flowing or self-compacting concrete
– High workability with low water content
– Improved surfaces
– Long Retention of concretes workability
– No segregation
Dosage
KAITSU® G-218 can vary with type of applications, normally range from 400 g to 1500 g / 100 kg of
cementitious material or binder. Accidental overdosing of KAITSU® G-218 causes an extension of
setting time of concrete. If this happens, consult supplier as soon as possible.
Packaging
200 Kg and 1,000 kg
Shelf life
12 months after production date, kept within the range of 5oc to 40oc.
Application
KAITSU® G-218 is suitable for use with all types of Portland cements, OPC, SRC cements and cement
replacement materials such as PFA, GGBFS and micro-silica KAITSU® G-218 should not be used in
conjunction with any other admixture unless prior approval is obtained from local KAITSU technical
support.
Mixing
KAITSU® G-218 should be added in the mixing water. In some instances, e.g. addition to ready mix
concrete on site, KAITSU® G-218 can be added directly in the truck mixer and mixed at maximum
speed for an extra 5 to 10 minutes till a proper mixing is achieved. The correct quantity of KAITSU®
G-218 should be measured by means of a recommended dispenser. The admixture should then be
added to the concrete with the mixing water to obtain the best results.
Health and safety
KAITSU® G-218 does not fall into the hazard classifications of current regulations. However, it should
not be swallowed or allowed to come into contact with skin and eyes. Suitable protective gloves and
goggles should be worn. Splashes on the skin should be removed with water. In case of contact with
eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical
attention immediately – Do not induce vomiting.
*For further information consult the Materials Safety Data Sheet available for this product.
KAITSU® G-218 is Non-flammable.
Cleaning and disposal
Spillages of KAITSU® G-218 should be absorbed onto sand or earth and transferred to suitable
containers. Remnants should be hosed down with large quantities of water. The disposal of excess
or waste material should be carried out in accordance with local legislation under the guidance of
the local waste regulatory authority.